مشخصات اصلی درایو 0.18 کیلووات آلتیوار 32 اشنایدر |
| خانواده محصول (Range of product) | Altivar 32 |
| نوع محصول یا جزء (Product or component type) | Variable speed drive |
| موارد استفاده (Product destination) | Asynchronous motors
Synchronous motors |
| کاربرد خاص محصول (Product specific application) | Complex machines |
| عملکرد موجود است (Function available) | - |
| سبک مونتاژ (Assembly style) | With heat sink |
| نام دستگاه (Component name) | ATV32 |
| فیلتر EMC (EMC filter) | Class C2 EMC filter integrated |
| تعداد فازهای شبکه (Network number of phases) | 1 phase |
| [ما] ولتاژ منبع تغذیه نامی (Rated supply voltage) | 200-240 V - 15-10 % |
| محدودیت های ولتاژ تغذیه (Supply voltage limits) | 170…264 V |
| فرکانس تغذیه (Supply frequency) | 50-60 Hz - 5-5 % |
| فرکانس شبکه (Network frequency) | 47.5-63 Hz |
| توان موتور (کیلووات) (Motor power kW) | 0.18 kW at 200-240 V |
| توان موتور (اسب بخار) (Motor power hp) | 0.25 hp at 200-240 V |
مشخصات تکمیلی درایو 0.18 کیلووات آلتیوار 32 اشنایدر |
| جریان خط (Line current) | 2.8 A for 240 V 1 phase 0.18 kW / 0.25 hp
3.4 A for 200 V 1 phase 0.18 kW / 0.25 hp |
| توان ظاهری (Apparent power) | 0.7 kVA at 240 V 1 phase 0.18 kW / 0.25 hp |
| جریان اتصال کوتاه خط (Prospective line Isc) | 1 kA for 1 phase |
| جریان خروجی اسمی (Nominal output current) | 1.5 A at 4 kHz 240 V 0.18 kW / 0.25 hp |
| حداکثر جریان گذرا (Maximum transient current) | 2.3 A for 60 s 0.18 kW / 0.25 hp |
| فرکانس خروجی (Output frequency) | 0.0005…0.599 kHz |
| فرکانس سوئیچینگ اسمی (Nominal switching frequency) | 4 kHz |
| فرکانس سوئیچینگ (Switching frequency) | 2-16 kHz adjustable |
| محدوده سرعت (Speed range) | 1…100 for asynchronous motor in open-loop mode |
| دقت سرعت (Speed accuracy) | +/- 10 % of nominal slip 0.2 Tn to Tn |
| دقت گشتاور (Torque accuracy) | +/- 15 % |
| گشتاور گذرا (Transient overtorque) | 170…200 % |
| گشتاور ترمز (Braking torque) | <= 170 % with braking resistor |
| مشخصات کنترل موتور ناهمزمان (Asynchronous motor control profile) | Voltage/frequency ratio, 5 points
Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, 2 points
Flux vector control without sensor, standard
Flux vector control without sensor - Energy Saving, NoLoad law |
| مشخصات کنترل موتور سنکرون (Synchronous motor control profile) | Vector control without sensor |
| حلقه تنظیم (Regulation loop) | Adjustable PID regulator |
| جبران لغزش موتور (Motor slip compensation) | Automatic whatever the load
Adjustable 0-300 %
Not available in voltage/frequency ratio (2 or 5 points) |
| سیگنال دهی محلی (Local signalling) | 1 LED red for drive voltage
1 LED green for CANopen run
1 LED red for CANopen error
1 LED red for drive fault |
| ولتاژ خروجی (Output voltage) | <= power supply voltage |
| سطح سر و صدا (Noise level) | 43 dB conforming to 86/188/EEC |
| عایق (Insulation) | Electrical between power and control |
| اتصال برق (Electrical connection) | Screw terminal, clamping capacity: 0.5-1.5 mm², AWG 18-AWG 14 (control)
Removable screw terminals, clamping capacity: 1.5-2.5 mm², AWG 14-AWG 12 (motor/braking resistor)
Screw terminal, clamping capacity: 1.5-4 mm², AWG 14-AWG 10 (power supply) |
| گشتاور سفت شدن (Tightening torque) | 0.5 N.m, 4.4 lb/ft (control)
0.7 N.m, 7.1 lb/ft (motor/braking resistor)
0.6 N.m, 5.3 lb/ft (power supply) |
| تغذیه (Supply) | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| تعداد ورودی آنالوگ (Analogue input number) | 3 |
| نوع ورودی آنالوگ (Analogue input type) | AI1 voltage: 0-10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI3 current: 0-20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| مدت زمان نمونه برداری (Sampling duration) | 2 ms (AI1, AI2, AI3) - analog input(s)
2 ms (AO1) - analog input(s) |
| زمان پاسخ (Response time) | LI1-LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)
R1A, R1B, R1C 2 ms for relay output(s)
R2A, R2C 2 ms for relay output(s) |
| دقت (Accuracy) | +/- 0.2 % (AI1, AI2, AI3) for a temperature of -10-60 °C
+/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C
+/- 1 % (AO1) for a temperature of 25 °C
+/- 2 % (AO1) for a temperature of -10-60 °C |
| خطای خطی (Linearity error) | +/- 0.2-0.5 % of maximum value (AI1, AI2, AI3)
+/- 0.3 % (AO1) |
| تعداد خروجی آنالوگ (Analogue output number) | 1 |
| نوع خروجی آنالوگ (Analogue output type) | AO1 software-configurable current 0-20 mA, impedance: 800 Ohm, resolution 10 bits
AO1 software-configurable voltage 0-10 V, impedance: 470 Ohm, resolution 10 bits |
| تعداد خروجی دیجیتال (Discrete output number) | 3 |
| نوع خروجی دیجیتال (Discrete output type) | Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
Configurable relay logic: (R2A, R2B) NO - 100000 cycles
Logic: (LO) |
| حداقل جریان سوئیچینگ (Minimum switching current) | 5 mA at 24 V DC for configurable relay logic |
| حداکثر جریان سوئیچینگ (Maximum switching current) | R1: 3 A at 250 V AC resistive load, cos phi = 1
R1: 4 A at 30 V DC resistive load, cos phi = 1
R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
R2: 5 A at 250 V AC resistive load, cos phi = 1
R2: 5 A at 30 V DC resistive load, cos phi = 1 |
| تعداد ورودی دیجیتال (Discrete input number) | 7 |
| نوع ورودی دیجیتال (Discrete input type) | Programmable (sink/source) (LI1-LI4)24-30 V DC, with level 1 PLC
Programmable as pulse input 20 kpps (LI5)24-30 V DC, with level 1 PLC
Switch-configurable PTC probe (LI6)24-30 V DC
Safe torque off (STO)24-30 V DC - 1500 Ohm |
| منطق ورودی دیجیتال (Discrete input logic) | Negative logic (sink) (LI1-LI6), > 19 V (state 0), < 13 V (state 1)
Positive logic (source) (LI1-LI6), 11 V (state 1) |
| رمپ های شتاب و کاهش سرعت (Acceleration and deceleration ramps) | S
Deceleration ramp automatic stop DC injection
Ramp switching
Linear
Deceleration ramp adaptation
CUS
U |
| ترمز تا سکون (Braking to standstill) | By DC injection |
| نوع حفاظت (Protection type) | Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: drive |
| پروتکل پورت ارتباطی (Communication port protocol) | Modbus
CANopen |
| نوع رابط (Connector type) | 1 RJ45 (on front face) for Modbus/CANopen |
| رابط فیزیکی (Physical interface) | 2-wire RS 485 for Modbus |
| قاب انتقال (Transmission frame) | RTU for Modbus |
| نوع پلاریزاسیون (Type of polarization) | No impedance for Modbus |
| تعداد آدرس ها (Number of addresses) | 1…127 for CANopen
1…247 for Modbus |
| روش دسترسی (Method of access) | Slave CANopen |
| سازگاری الکترومغناطیسی (Electromagnetic compatibility) | 1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| عرض (Width) | 45 mm |
| ارتفاع (Height) | 325 mm |
| عمق (Depth) | 245 mm |
| وزن خالص (Net weight) | 2.4 kg |
| کارت توسعه (Option card) | Communication card for CANopen daisy chain
Communication card for CANopen open style
Communication card for DeviceNet
Communication card for EtherNet/IP
Communication card for Profibus DP V1 |
مشخصات زیست محیطی درایو 0.18 کیلووات آلتیوار 32 اشنایدر |
| استانداردها (Standards) | EN/IEC 61800-3
EN 61800-3 environments 2 category C2
EN/IEC 61800-5-1
EN 61800-3 environments 1 category C2
EN 55011 class A group 1 |
| گواهینامه های محصول (Product certifications) | C-Tick
CSA
UL
GOST
NOM 117 |
| علامت گذاری (Marking) | CE |
| درجه آلودگی (Pollution degree) | 2 conforming to EN/IEC 61800-5-1 |
| درجه حفاظت IP (IP degree of protection) | IP20 conforming to EN/IEC 61800-5-1 |
| مقاومت در برابر لرزش (Vibration resistance) | 1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f = 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| مقاومت در برابر ضربه (Shock resistance) | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| رطوبت نسبی (Relative humidity) | 5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3 |
| دمای هوای محیط برای عملیات (Ambient air temperature for operation) | -10…50 °C without derating
50…60 °C with derating factor |
| دمای هوای محیط نگهداری (Ambient air temperature for storage) | -25…70 °C |
| ارتفاع عملیاتی (Operating altitude) | <= 1000 m without derating
1000-2000 m with current derating 1 % per 100 m |
| موقعیت عملیاتی (Operating position) | Vertical +/- 10 degree |
نقد و بررسی‌ها
هنوز بررسی‌ای ثبت نشده است.